Cisco ASR 1000 network interface processor

SKU: ASR1000-ESP20=

The Cisco ASR 1000 Series Embedded Service Processors (ESPs) are based on the innovative, industry-leading Cisco QuantumFlow Processor for next-generation forwarding and queuing in silicon. These modules use the first generation of the hardware and s...

£24,514.27 £20,428.56
Truck-green 99999 in stock
Delivery & Returns
Summary

Summary

The Cisco ASR 1000 Series Embedded Service Processors (ESPs) are based on the innovative, industry-leading Cisco QuantumFlow Processor for next-generation forwarding and queuing in silicon. These modules use the first generation of the hardware and software of the Cisco QuantumFlow Processor architecture.

The 5-, 10-, 10-N- 20- and 40-Gbps Cisco ASR 1000 Series ESPs (part numbers ASR1000-ESP5, ASR1000-ESP10, ASR1000-ESP10-N, ASR1000-ESP20, and ASR1000-ESP40, respectively) provide five centralized forwarding-engine options for the Cisco ASR 1000 Series Aggregation Services Routers. Additionally, the Cisco ASR 1002 Fixed Router includes a nonmodular, fixed ESP with throughput of 2.5-Gbps and the ASR 1001 comes with a nonmodular, fixed ESP with throughput of 2.5-Gbps which is upgradable with a software activated performance upgrade license to 5-Gbps.

The Cisco ASR 1000 Series 10-N-Gbps ESP (ASR1000-ESP10-N) is the nonencryption version of the Cisco ASR 1000 Series 10-Gbps ESP (ASR1000-ESP10). The Cisco ASR 1000 Series 10-N-Gbps ESP can only support noncrypto Cisco IOS Software images and will never support encryption capabilities such as IP Security (IPsec). In future releases, the Cisco ASR 1000 Series 10-N-Gbps ESP may support secured network management features such as Secure Shell (SSH) Protocol, Secure Sockets Layer (SSL), and Simple Network Management Protocol Version 3 (SNMPv3).

The Cisco ASR 1000 Series ESPs are responsible for the data-plane processing tasks, and all network traffic flows through them. The modules perform all baseline packet routing operations, including MAC classification, Layer 2 and Layer 3 forwarding, quality-of-service (QoS) classification, policing and shaping, security access control lists (ACLs), VPNs, load balancing, and NetFlow. They are also responsible for features such as firewalls, intrusion prevention, Network Based Application Recognition (NBAR), Network Address Translation (NAT), and Cisco IOS Flexible Pattern Matching.
Tech Specs

Product Description

Cisco ASR 1000, IPv6, Telnet (CLI), Console (CLI), SNMP v3, 4 GB, 256 MB, 428 x 369 x 23 mm, 5 - 40 °C

Tech Specs

Technical details

Compatibility
Cisco ASR 1002, 1004, 1006
Quality of Service (QoS) support
Y

Protocols

Supported network protocols
IPv6

Management features

Management protocols
Telnet (CLI), Console (CLI), SNMP v3

Security

Access Control List (ACL)
Y

Memory

Route memory
4 GB
Packet memory
256 MB

Weight & dimensions

Dimensions (WxDxH)
428 x 369 x 23 mm

Operational conditions

Operating temperature (T-T)
5 - 40 °C
Storage temperature (T-T)
-40 - 70 °C
Operating relative humidity (H-H)
5 - 90%
Storage relative humidity (H-H)
5 - 95%
Operating altitude
-60 - 2000 m

Power

Power consumption (typical)
140 W

Certificates

Safety
UL60950 & CAN/CSA-C22.2 No. 60950, AS/NZS 60950, IEC/EN 60950, 73/23/EEC
Electromagnetic compatibility
AS/NZ 3548, EN55022, CISPR 22, EN55022, 47 CFR Part 15, VCCI V-3/01.4, CNS-13438, GR1089
Downloads
Ask a question

Ask a question

Ask a question about: Cisco ASR 1000 network interface processor

Summary

Lorem ipsum dolor sit amet, consectetur adipisicing elit. A aperiam commodi distinctio doloremque eos facere harum hic laboriosam nihil optio quas qui quia, quod ratione saepe tempore totam ut voluptatum?

Close-black