Available on orders before 3pm
Cisco Meraki MS390-48UX2-HW network switch Managed L3 Gigabit Ethernet (10/100/1000) White 1U Power over Ethernet (PoE)
EAN:
0889728231466
Overview The Meraki MS390 addresses the most demanding enterprise applications by combining the simplicity of the Meraki dashboard with powerful switching hardware. To satisfy high-bandwidth applications and the deployment of high-speed...
Product Description
Product Description
Overview
The Meraki MS390 addresses the most demanding enterprise applications by combining the simplicity of the Meraki dashboard with powerful switching hardware. To satisfy high-bandwidth applications and the deployment of high-speed 802.11ax/wifi-6 access points, the MS390 provides multigigabit ports, 480G stacking, and modular 10/40G uplinks. The MS390 delivers resiliency with fast stack convergence and StackPower. The MS390 provides Adaptive Policy using an overthe-wire tag which segments traffic into security groups to deliver scalable security. The MS390 is integrated under the Meraki dashboard to provide a simply powerful solution to the most demanding wired access applications. Adaptive Policy provides simple & scalable security policies to segment traffic using Security Groups. Security Groups are created in the dashboard using natural language such as “IOT device” & “Guest.” The security policy intent (e.g., Permit or Deny) is then simply provisioned between Security Groups which results in the segmentation of each group’s traffic. By making security policy management intuitive and scalable relative to legacy IP-address based Access Control Lists, Adaptive Policy empowers operators to confidently secure their network traffic independent of future network changes. By pooling & distributing power across MS390s using a series of StackPower cables, StackPower provides simple and resilient power distribution across the stack.
Technical Spec
Technical Spec
Product Description
Cisco Meraki MS390-48UX2-HW, Managed, L3, Gigabit Ethernet (10/100/1000), Power over Ethernet (PoE), Rack mounting, 1U
Tech Specs
Management features
Switch type
Managed
Switch layer
L3
Cloud-managed
Y
System event log
Y
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity
48
Basic switching RJ-45 Ethernet ports type
Gigabit Ethernet (10/100/1000)
Network
Networking standards
IEEE 802.11ax,IEEE 802.1Q,IEEE 802.1ab,IEEE 802.1p,IEEE 802.1s,IEEE 802.3ad
Port mirroring
N
Flow control support
Y
Link aggregation
Y
Broadcast storm control
Y
Spanning tree protocol
Y
Auto-negotiation
Y
VLAN support
Y
Number of VLANs
4094
Data transmission
MAC address table
32000 entries
Switching capacity
640 Gbit/s
Forwarding rate
476.19 Mpps
Static route
Y
Jumbo frames support
Y
Security
DHCP features
DHCP relay,DHCP server,DHCP snooping
Access Control List (ACL)
Y
IGMP snooping
Y
Security algorithms
802.1x RADIUS,SNMP
Loop protection
Y
BPDU filtering/protection
Y
Protocols
Routing protocols
VRRP
IPv4 & IPv6 features
IPv4/IPv6 access-control list (ACL)
Design
Rack mounting
Y
Stackable
Y
Product colour
White
Form factor
1U
Number of fans
3 fan(s)
Certification
FCC Part 15 (CFR 47) Class A, ICES-003 Class A, CISPR22 Class A, CNS13438, EN 300 386 V1.6.1, EN 55022 Class A, EN, 61000-3-2, EN61000-3-3, KN 32, TCVN 7189 Class A, EN 55032 , CISPR 32 Class A, V-2/2015.04, V-3/2015.04, VCCI-CISPR 32 Class A, CISPR24, EN 300 386 V1.6.1, EN 55024, KN35, TCVN 7317, CAN/CSA-C22.2 No. 60950-1, UL 60950-1, EN 60950-1, IEC 60950-1, AS/NZS 60950.1, RoHS
Performance
Mean time between failures (MTBF)
198647 h
Power
Power supply included
Y
AC input voltage
100 - 240 V
AC input frequency
50/60 Hz
Power consumption (max)
843.8 W
Power over Ethernet (PoE)
Power over Ethernet (PoE)
Y
Total Power over Ethernet (PoE) budget
645 W
Operational conditions
Operating temperature (T-T)
-5 - 45 °C
Operating relative humidity (H-H)
5 - 90%
Weight & dimensions
Width
445 mm
Depth
564 mm
Height
44 mm
Weight
9.09 kg
Packaging data
Quick start guide
Y
Rack mount kit
Y
Downloads
Downloads
Ask a question