Available on orders before 3pm
Hewlett Packard Enterprise 533FLR-T Internal Ethernet 20000 Mbit/s
EAN:
4948382948601
Are your enterprise data centers growing and requiring increased network performance? Increased workload demands are putting pressure on server I/O. The HP FlexFabric 10Gb 2-port 533FLR-T Adapter increases throughput for the HP ProLiant Gen8 DL...
Product Description
Product Description
Are your enterprise data centers growing and requiring increased network performance? Increased workload demands are putting pressure on server I/O. The HP FlexFabric 10Gb 2-port 533FLR-T Adapter increases throughput for the HP ProLiant Gen8 DL and SL Server series by using the innovative HP FlexibleLOM form factor to offer dual-ports in a 10GBASE-T adapter configuration.
This is an affordable choice for workload-intensive computing environments, providing a reliable, high performance 10 GbE connectivity solution.
Accelerates Server Performance
- The HP FlexFabric 10Gb 2-port 533FLR-T Adapter boosts network performance with full line-rate 10 GbE throughput across all ports.
- Provides increased server performance by delivering full hardware offload for storage traffic.
Robust Virtualization Capabilities
- The HP FlexFabric 10Gb 2-port 533FLR-T Adapter delivers Single Root I/O Virtualization (SR-IOV) support to allow multiple operating systems to share a physical interconnect.
- Supports Vmware NetQueue and Microsoft VMQ technologies.
- Enhances network management and efficiency with support for VLAN tagging.
Streamlines Deployment and Management
- Makes Broadcom Ethernet solutions available across a wide range of HP server platforms.
- Unifies NIC and storage management using HP ProActive Insight architecture.
- Provides backward compatibility with existing 1GbE networks and low-cost CAT 6a UTP cabling, supporting distances up to 100 meters.
This is an affordable choice for workload-intensive computing environments, providing a reliable, high performance 10 GbE connectivity solution.
Accelerates Server Performance
- The HP FlexFabric 10Gb 2-port 533FLR-T Adapter boosts network performance with full line-rate 10 GbE throughput across all ports.
- Provides increased server performance by delivering full hardware offload for storage traffic.
Robust Virtualization Capabilities
- The HP FlexFabric 10Gb 2-port 533FLR-T Adapter delivers Single Root I/O Virtualization (SR-IOV) support to allow multiple operating systems to share a physical interconnect.
- Supports Vmware NetQueue and Microsoft VMQ technologies.
- Enhances network management and efficiency with support for VLAN tagging.
Streamlines Deployment and Management
- Makes Broadcom Ethernet solutions available across a wide range of HP server platforms.
- Unifies NIC and storage management using HP ProActive Insight architecture.
- Provides backward compatibility with existing 1GbE networks and low-cost CAT 6a UTP cabling, supporting distances up to 100 meters.
Technical Spec
Technical Spec
Product Description
Hewlett Packard Enterprise 533FLR-T, Internal, Wired, PCI, Ethernet, 20000 Mbit/s
Tech Specs
Ports & interfaces
Connectivity technology
Wired
Internal
Y
Host interface
PCI
Interface
Ethernet
Ethernet LAN (RJ-45) ports
2
Bandwidth
Maximum data transfer rate
20000 Mbit/s
Full duplex
Y
Networking
Networking standards
IEEE 802.1Q,IEEE 802.3,IEEE 802.3ad,IEEE 802.3x
Chipset
Broadcom BCM57810S
Ethernet LAN
Y
Ethernet LAN data rates
10,100,1000,10000 Mbit/s
Power
Power consumption (typical)
15.5 W
Design
PCI Card form factor
Full-height (low-profile)
Performance
Flash memory
256 MB
Certificates
RoHS compliance
Y
Operational conditions
Operating temperature (T-T)
0 - 55 °C
Operating relative humidity (H-H)
5 - 95%
Downloads
Downloads
Ask a question