Available on orders before 3pm
Cisco SFP - GE/1G-FC/2G-FC/HDTV - 1310 nm - SM - LC - EXT TEMP network media converter 2000 Mbit/s
EAN:
0882658046872
The SFP transceiver module is a bidirectional device with a transmitter and receiver in the same physical package. The module interfaces to the network through a connector interface on the electrical ports and through an LC termination connector...
Product Description
Product Description
The SFP transceiver module is a bidirectional device with a transmitter and receiver in the same physical package. The module interfaces to the network through a connector interface on the electrical ports and through an LC termination connector on the optical ports. Electrical interfaces and dimensions are defined in the SFF-8472 industry-standard multisource agreement (MSA).
Transmitter
In the transmit direction, the SFP transceiver module receives the electrical signal and transmits this data in an optical signal by using a laser driver that controls the laser diode. The optical output power is held constant by an automatic power control circuit.
Receiver
In the receive direction, the SFP transceiver module receives an NRZ optical signal and converts it to an electrical equivalent. The receive portion of the module will use some kind of amplifier to control the converted electrical signal.
EEPROM
This type of SFP transceiver is identified by the standard two-wire serial interface used in EEPROM with an I2C interface (with serial ID functions) that is part of the GBIC specifications and the SFF-8472 MSA. In addition, EEPROM offers an enhanced monitoring interface for optical transceivers as described in SFF-8472, which allows real-time access to the device to enable monitoring of received optical power, laser bias current, laser optical output power, etc.
Transmitter
In the transmit direction, the SFP transceiver module receives the electrical signal and transmits this data in an optical signal by using a laser driver that controls the laser diode. The optical output power is held constant by an automatic power control circuit.
Receiver
In the receive direction, the SFP transceiver module receives an NRZ optical signal and converts it to an electrical equivalent. The receive portion of the module will use some kind of amplifier to control the converted electrical signal.
EEPROM
This type of SFP transceiver is identified by the standard two-wire serial interface used in EEPROM with an I2C interface (with serial ID functions) that is part of the GBIC specifications and the SFF-8472 MSA. In addition, EEPROM offers an enhanced monitoring interface for optical transceivers as described in SFF-8472, which allows real-time access to the device to enable monitoring of received optical power, laser bias current, laser optical output power, etc.
Technical Spec
Technical Spec
Product Description
Cisco SFP - GE/1G-FC/2G-FC/HDTV - 1310 nm - SM - LC - EXT TEMP, 2000 Mbit/s, 1000Base LX, Wired, 393700.8" (10000 m), 1310 nm, 9970080 h
Tech Specs
Network
Maximum data transfer rate
2000 Mbit/s
Cabling technology
1000Base LX
Ports & interfaces
Connectivity technology
Wired
Performance
Maximum transfer distance
393700.8" (10000 m)
Wavelength
1310 nm
Mean time between failures (MTBF)
9970080 h
Design
Compliance industry standards
IEEE-802.3
Power
Power consumption (typical)
1 W
Management features
Plug and Play
Y
Operational conditions
Operating temperature (T-T)
-10 - 85 °C
Other features
Interface
SFP
Connector(s)
LC-LC
Downloads
Downloads
Ask a question