Available on orders before 3pm
Fujitsu EP400i RAID controller PCI 3.0 12 Gbit/s
EAN:
4053026598699
The RAID concept (Redundant Array of Independent Disks) refers to several independent hard disks which form a large logical drive when switched together. Redundancy information is calculated from several data blocks (except for RAID 0) and saved...
Product Description
Product Description
The RAID concept (Redundant Array of Independent Disks) refers to several independent hard disks which form a large logical drive when switched together. Redundancy information is calculated from several data blocks (except for RAID 0) and saved distributed to the individual hard disks. Your operating system no longer accesses the individual hard disks, but the array.
The actual objective of the RAID concept is to increase availability and prevent downtimes in the event of a hard disk failure. However, the theoretical security of the RAID concept is only as good as the RAID controller used. Benefit from the Fujitsu RAID controllers where technology, experience and practical implementation all ensure the security that your company needs in the event of an emergency.
The actual objective of the RAID concept is to increase availability and prevent downtimes in the event of a hard disk failure. However, the theoretical security of the RAID concept is only as good as the RAID controller used. Benefit from the Fujitsu RAID controllers where technology, experience and practical implementation all ensure the security that your company needs in the event of an emergency.
Technical Spec
Technical Spec
Product Description
Fujitsu EP400i, SAS,Serial ATA, PCI, 0, 1, 5, 6, 10, 50, 60, 12 Gbit/s
Tech Specs
Ports & interfaces
Supported storage drive interfaces
SAS,Serial ATA
Host interface
PCI
PCI Express slots version
3.0
Performance
RAID levels
0, 1, 5, 6, 10, 50, 60
SSD support
Y
Data transfer rate
12 Gbit/s
S.M.A.R.T. support
Y
Ask a question